LANCE NOZZLES
■ The threads indicated in inches are of the BSPP type (Cylindrical Gas).
■ Material: Stainless steel with heat treatment for high wear resistance.
■ A large number of different types of each shape are available in stock, with or without a front hole and a different number of front holes at different exit angles.
■ When placing an order, indicate working pressure and flow rate, hose diameter and length.
NOZZLES 500 bar
| Shape | Thread | Diameter (mm) | Length (mm) | Weight (gr) | Wrench size (mm) |
| 59 | Metric 6×1 M | 8 | 28 | 5 | – |
ATTENTION: When using rigid lances. Take into account the reaction force to be borne by the operator. | |||||
NOZZLES 1,000 bar
| Shape | Thread | Diameter (mm) | Length (mm) | Weight (gr) | Wrench size (mm) |
| 515 | 1/4″H | 18 | 40,0 | 54 | 16 |
| 505 | 1/8″ H | 13 | 29,0 | 21 | 12 |
| 425 | M7x1 H, M8x1 H | 10 | 28,5 | 11 | 9 |
ATTENTION: When using rigid lances. Take into account the reaction force to be borne by the operator. | |||||
FORWARD NOZZLES
They are used mounted together with other hose nozzles to increase their propulsion or with lance nozzles to counteract the reaction force and quickly evacuate waste, preventing blockages and the lance being ejected towards the operator with risk of accidents.
■ Maximum pressure: 750 bar.
■ Materials: Stainless steel with heat treatment for high wear resistance.
| Shape | Thread | No. Jets+angle | Diameter (mm) | Length (mm) | Weight (gr) | Wrench size (mm) |
| 93 | M7x1 H | 3 at 30° | 10 | 40 | 15 | 8 |
| 90 | 1/8″ H | 12 | 42 | 20 | 10 | |
| 91 | 1/4″ H | 18 | 50 | 60 | 16 | |
■ The threads indicated in inches are of the BSPP type (cylindrical gas) ■ When placing an order, indicate working pressure and flow rate, hose diameter and length. | ||||||