HIGH PRESSURE PUMP

SERIES 345R

3 pistons 50 HP (37 Kw)

  • Input shaft to the left (I) or right as seen from the cylinder head.
  • Auxiliary power take-off on the shaft, opposite to the drive side (On demand).
  • Crankcase type 345, the drive shaft on the crankshaft itself, max. rotation 825 r.p.m.
  • Crankcase 345R side reducer, reduction 1.76.
  • Stroke 45 mm.
  • Ceramic pistons.
  • High-pressure cylinder head A, in spheroidal cast iron or stainless steel.
  • Internal parts in contact with the liquid made of corrosion-resistant materials.
  • Different pressure regulating valves and outlet fittings.
DATA SHEET
Cylinder HeadCylinder Head MaterialCylinder Head TypeFlow (l/min)Pressure (l/min)Weight (Kg)Dimensions
A01Spheroidal cast iron345 A0133

210		550

90		130
345R A01150
A02Stainless steel345 A02130
345R A02 150
A02 - B02: Stainless steel cylinder head body. Cast iron suction manifold.
* To obtain this pressure, less motor power than indicated is required.
  For pressures above 300 bar, the A02 stainless steel cylinder head is recommended.
  Crankshaft rotation at 750 r.p.m. or lower for intensive service, 825 r.p.m. for intermittent service.