ROTARY VIBRATING NOZZLES
- Vibrating rotary nozzles produce continuous hammering in the pipe, breaking and lifting hard sedimentations and solidifications in the lower part of the tubes.
- Scraper-type nozzles remove lime and urine residue from the entire perimeter in small diameter pipes.
- Eccentric vibrators, with the off-center rotor, are more aggressive than normal versions whose recessed rotor rotates centrally.
- Rotary drilling nozzles are another different range; equipped with an inclined rotating front jet, they generate a conical water vortex that drills through obstructions and at the same time cleans the walls better.
- All types have replaceable nozzles with long-lasting ceramic inserts.
| Type VR – Scrapers | Thread connection | Dimensions (mm) | Rotary jets (mm) | Rear jets (mm) | Minimum Flow (L/m at 100 bar) | Application ØPipes (mm) | Weight (Kg) |
| 28105121 | 1/8″ | Ø12 x 26 | 2x – 45° + 2x – 80° | 2x – 45° + 2x – 80° | 20 | >20 | 0,02 |
| 28105191 | 1/8″ | Ø19 x 31 | 2x – 45° x 2x – 80° | 2x – 45° x 2x – 80° | 20 | >20 | 0,03 |
| 28105192 | 1/4″ | ||||||
| Type V – Vibrators | Thread connection | Dimensions (mm) | Rotary jets (mm) | Rear jets (mm) | Minimum Flow (L/m at 100 bar) | Application ØPipes (mm) | Weight (Kg) |
28105282 | 1/4″ | Ø28 x 65 | 2xM4 – 45° x 2xM4 – 80° | – | 30 | >30 | 0,22 |
| 28105283 | 3/8″ | ||||||
| 281054041 | 1/2″ | Ø40 x 78 | 2xM6 – 45° x 2xM6 – 80° | 3 x M6 – 15° | 70 | >70 | 0,60 |
| 28105404 | 1/2″ | – | |||||
| 281055051 | 3/4″ | Ø50 x 80 | 2xM6 – 45° x 2xM6 – 80° | 3 x M6 – 25° | 70 | >70 | 0,95 |
| 281056061 | 1″ | Ø60 x 103 | 2xM6 – 45° x 2xM6 – 80° | 3 x M6 – 25° | 100 | >100 | 1,40 |
| 2810510061 | 1″ | Ø100 x 180 | 2xM10 – 45° x 2xM10 – 80° | 3 x M10 – 25° | 200 | >200 | 6,85 |
| 281051007 | 1 1/4″ | – | |||||
| Type VE – Eccentric | Thread connection | Dimensions (mm) | Rotary jets (mm) | Rear jets (mm) | Minimum Flow (L/m at 100 bar) | Application ØPipes (mm) | Weight (Kg) |
| 281052821 | 1/4″ | Ø28 x 65 | 2 x M4 – 80° | – | 30 | >30 | 0,22 |
| 281052822 | 3 x M4 – 25° | ||||||
| 28105283 | 3/8″ | – | |||||
| 28105404 | 1/2″ | Ø50 x 95 | 2xM4 – 45° x 2xM4 – 80° | 3 x M6 – 15° | 70 | >70 | 0,6 |
| Type VBL – VIBRATORS | Thread connection | Dimensions (mm) | Rotary jets (mm) | Rear jets (mm) | Minimum Flow (L/m at 100 bar) | Application ØPipes (mm) | Weight (Kg) |
| 2810510051 | 3/4″ | Ø100 x 173 | 4 x M6 – 90° | 6 x M6 – 25° | 190 | >150 | 4,3 |
| 2810510061 | 1″ | ||||||
| 2810520561 | 1″ | Ø205 x 340 | 3 x M10 – 36° | 6 x M10 – 23° | 200 | >300vV | 12,6 |
| 2810520571 | 1 1/4″ | 300 | |||||