HIGH-PRESSURE PUMP

SERIES 3150 B

3 pistons 150 HP (110 Kw)

  • Input shaft to the left (I) or right as viewed from the cylinder head.
  • Auxiliary power take-off on the shaft, opposite to the drive side.
  • Crankcase type 3150 internal reducer with reduction 2.963. Type 3150R reduction 3.652.
  • Crankcase 3150 E / 3150R E With forced lubrication (Crankshaft-connecting rods-piston guides) [Photo]
  • Stroke 95 mm.
  • Ceramic pistons.
  • High-pressure cylinder head A in spheroidal cast iron or stainless steel.
  • Low-pressure or high-flow cylinder head B in spheroidal cast iron or stainless steel.
  • Internal parts in contact with the liquid made of corrosion-resistant materials.
  • Different pressure regulating valves and outlet fittings.
TECHNICAL DATA SHEET
Cylinder HeadCylinder Head MaterialCylinder Head TypeFlow (l/min)Pressure (l/min)Weight (Kg)Dimensions
HIGH PRESSUREA01Spheroidal Cast Iron3150A01 / 3150RA0152

218		750

250		335
A02Stainless Steel3150A02 / 3150RA02
LOW PRESSUREBSpheroidal Cast Iron3150B / 3150RB276

397		200

140		310
B02Stainless Steel3150B02 / 3150RB02
A02 - B02: Stainless steel cylinder head body. Cast iron suction manifold.
AI - BI: Stainless steel cylinder head body and suction manifold.
* To achieve this pressure, less motor power than indicated is required.
For pressures above 300 bar, the A02 stainless steel cylinder head is recommended.
Crankshaft rotation at 411 r.p.m. or lower for intensive service. Otherwise, intermittent service.